Ferrosilicon powder is the same as ferrosilicon. In order to meet the quality requirements, the quality of raw materials needs to be strictly controlled. The following will explain the quality requirements for raw materials for ferrosilicon powder:
1. There should be no mountain pebbles, weathered stones, sand and other impurities on the surface of the silica; the particle size should be 80-140mm.
2. Blue charcoal, the fixed carbon content is greater than or equal to 82%, the particle size is 8-18mm, the moisture is less than or equal to 16%, the sieve ratio is less than or equal to 5%, the volatile content is less than or equal to 8%, and the ash content is less than or equal to 8%.
3. Electrode paste, the ash content is less than or equal to 6%, the volatile content in summer is between 11.2-12.5, and the volatile content in winter will be controlled between 11-12.3. The appearance quality of the electrode paste must be qualified, and the cross section must not contain impurities or water droplets.
4. Pellets. The water content in pellets should be less than or equal to 0.8%, and the iron content should be greater than or equal to 60%. The particle size of pellets should be 8-16mm, and the compressive strength should be greater than or equal to 2500N.
Oct 08, 2023
Leave a message
Ferrosilicon powder requirements for raw materials
Send Inquiry


